Dodge SRT4 Forums - SRT4mation banner

1 - 20 of 28 Posts

·
Registered
Joined
·
429 Posts
Discussion Starter · #1 · (Edited)
hey any one hear anything about the control arm bushings from psi-fi they seem to good to be true from what i red on their site
does anyone have these bushing installed in their car and if so what kind of gains are we talking about? the site says about .1-.2 in the 1/4 and no wheel hop so that means lower 60ft right?
so i this the only mod i should get if i pick only one???

Traction Bushings
 

·
Registered
Joined
·
1,020 Posts
a good set of mounts and these bushings will eliminate wheelhop under 99% of circumstances...
 

·
Registered
Joined
·
1,020 Posts
Up a hill in the rain, once... LOL
 

·
Registered
Joined
·
1,020 Posts
and only a little bit, but never happened again, so who knows... I never say 100% anyways because then people start saying poop...
 

·
BottomOfNewYork
Joined
·
1,856 Posts
i dont have motor mounts have inserts but i also know how to drive my car but i do have it lowered so that might help

cause i am very close to the ground
 

·
Registered
Joined
·
8,169 Posts
they are very good, ive put them in a few cars and very impressed how well they work.if you put mounts in it elimates majority of the wheel hop but you will still get it at the track.lowering the car also helps but mounts+traction bushings+coilovers=hard launches and no hop
 

·
Registered
Joined
·
429 Posts
Discussion Starter · #11 · (Edited)
true

TopOfNewYork said:
i dont have motor mounts have inserts but i also know how to drive my car but i do have it lowered so that might help

cause i am very close to the ground
i know how to drive my car to but every little bit helps seems to good to be true thats all... i figure i drop it and do the mounts all at the same time to ummm save time... anyone got a press i can use, psi-fi is out of the preassembled ones and i dont wanna drive all the way down there to have something done i can do myself
 

·
Registered
Joined
·
8,934 Posts
I see ur saving up for stg 2 with toys... do urself a favor, pass on that! haha

*waits for brett to come here crying and defending stage 2*
 

·
Registered
Joined
·
1,020 Posts
no stage 1 ever beat amy's car when it had stage 2... period...
 

·
Registered
Joined
·
1,529 Posts
save yourself the money, i can think of a few ppl who have gone from s2 to s1. i have personally driven a s2/ no toys with other mods...didn't pull close to what mine does.
 

·
Registered
Joined
·
792 Posts
I have Nemos bushings on my 2004 Eblue and Psi-fi's bushings on my 11 second Red SRT.

I can very fairly give a head to head comparision....

I believe both products are a good buy, as both helped us to lower 60ft times.

I do give a slight edge to Nemos because they feel better, firmer, less noise. This is not a knock on Psi-Fi, as I will stick with their parts in the Red car.

I don't think you go wrong with either. I believe Nemo was asking $235...

Whomever gives the better price, go with it.
 

·
Registered
Joined
·
1,529 Posts
do you have to retighten them after awhile like the psi fi? that was the only thing keeping me from getting them.
 

·
Registered
Joined
·
792 Posts
srtjay said:
do you have to retighten them after awhile like the psi fi? that was the only thing keeping me from getting them.

I have not had to do this on either car yet, but I am going to check the Eblue and see if it needs it here soon, as Mopar Stage 1lowering springs are going on the car...
 

·
Registered
Joined
·
429 Posts
Discussion Starter · #19 · (Edited)
thanks

LittleMT said:
I have Nemos bushings on my 2004 Eblue and Psi-fi's bushings on my 11 second Red SRT.

I can very fairly give a head to head comparision....

I believe both products are a good buy, as both helped us to lower 60ft times.

I do give a slight edge to Nemos because they feel better, firmer, less noise. This is not a knock on Psi-Fi, as I will stick with their parts in the Red car.

I don't think you go wrong with either. I believe Nemo was asking $235...

Whomever gives the better price, go with it.
great advice man...cant go wrong with advise from to fast as shit srt-4s

i got sway bars in today should i do everything at once(thats another weeks wait..for payday) or just go with wat comes in the nemos thou you have to press yourself right??? caus psi-fi has pre-done ones but if anyone has a press.........
 

·
Registered
Joined
·
920 Posts
I wanted the Psi Fi but couldnt afford them...so instead i got the Prothane urethane suspension bushing kit which includes solid urethane control arm bushings. i also have JLM top and bottom motor mounts and mopar springs with the ACR/PT Cruiser sway bars...

all in all, i love my set-up. car handles better, a tad louder but wheel hop is virtually gone. however if i had the money i would get IPP coilovers with the psi-fi bushings. but if ur goin for an inexpensive set-up that has great results then i recommend mine.
 
1 - 20 of 28 Posts
Top